THEO JANSEN MECHANISM

Theodorus Gerardus Jozef "Theo" Jansen (Dutch pronunciation: (born 14 March 1948) is a Dutch artist. In 1990, he began building large mechanisms out of PVC that are able to move on their own, known only as Strandbeest. The kinetic sculptures appear to walk. His animated works are intended to be a fusion of art and engineering, and he has said that "The walls between art and engineering exist only in our minds." He strives to equip his creations with their own artificial intelligence so they can avoid obstacles such as the sea by changing course when one is detected

Early life

Jansen was born in Scheveningen in the Netherlands. He grew up with a talent for both physics and art, and studied physics at the University of Delft. Jansen left the University in 1974 without a degree.While at Delft, Jansen was involved in many projects that involved both art and technology, including a paint machine and a UFO

          UFO

In 1979 Jansen started using cheap PVC pipes to build a 4-meter wide flying saucer that was filled with helium. It was launched over Delft in 1980 on a day when the sky was hazy. Light and sound came from the saucer. Because the saucer was black against a light sky, its size was hard to guess. The police even said it was 30 meters wide and some people swore they saw a halo around it. Jansen has claimed that this project "caused a near-riot". He said that they never found the UFO, and that it had probably landed somewhere in Belgium. He later redid the project over Paris.

                                                                                                                                                                                                                                   Painting machine

Jansen's painting machine was developed in 1984–86 in Delft, and was a somewhat bigger project than his UFO. It consisted of a tube with a light cell situated at its end, which when darkness 'hit' it would start spraying. This created paintings of the silhouettes of the people who were standing in front of it. This machine was attached to a large piece of wood and hoisted against a wall where it would move back and forth and create 2D images of everything in the room.

MY NEXT PROJECTS
1)UNDERWATER WELDING
2)Goodyear’s future tires for self-driving cars: four maglev spheres
3)Solar Roadways
4)PELTON WHEEL TURBINE